QInstaller::ProxyCredentialsDialog
Dialog
The proxy %1 requires a username and password.
Username:
Username
Password:
Password
Proxy Credentials
QInstaller::ServerAuthenticationDialog
Server Requires Authentication
You need to supply a username and password to access this site.
Username:
Password:
%1 at %2
Dialog
Http authentication required
You need to supply a Username and Password to access this site.
Username:
Password:
%1 at %2
SettingsDialog
Settings
Network
No proxy
System proxy settings
Manual proxy configuration
HTTP proxy:
Port:
FTP proxy:
Repositories
Add Username and Password for authentication if needed.
Use temporary repositories only
Add
Remove
Test
Select All
Deselect All
Show Passwords
Check this to use repository during fetch.
Add the username to authenticate on the server.
Add the password to authenticate on the server.
The server's URL that contains a valid repository.
An error occurred while testing this repository.
The repository was tested successfully.
Do you want to disable the repository?
Do you want to enable the repository?
Hide Passwords
Use
Username
Password
Repository
Default repositories
Temporary repositories
User defined repositories
QInstaller
Invalid content in "%1".
No marker found, stopped after %1.
Cannot open file "%1" for reading: %2
Cannot open file "%1" for writing: %2
Read failed after %1 bytes: %2
Copy failed: %1
Write failed after %1 bytes: %2
bytes
KB
MB
GB
TB
PB
EB
ZB
YB
Cannot remove file "%1": %2
Cannot remove directory "%1": %2
Cannot create directory "%1".
Cannot copy file from "%1" to "%2": %3
Cannot move file from "%1" to "%2": %3
Cannot create directory "%1": %2
Cannot open temporary file: %1
Cannot open temporary file for template %1: %2
Cannot copy file "%1" to "%2": %3
Cannot copy file "%1" to "%2".
The specified module could not be found.
QObject
Error acquiring admin rights
Please make sure that the current user has read access to file "%1" or try running %2 as an administrator.
Another %1 instance is already running. Wait until it finishes, close it, or restart your system.
Cannot start installer binary as updater.
Cannot start installer binary as package manager.
Cannot start installer binary as uninstaller.
Empty repository list for option 'addRepository'.
Empty repository list for option 'addTempRepository'.
Empty repository list for option 'setTempRepository'.
Empty repository list for option 'installCompressedRepository'.
The file %1 does not exist.
Arguments missing for option %1
Invalid button value %1
Incorrect arguments for %1
BinaryLayout
Cannot seek to %1 to read the embedded meta data count.
Cannot seek to %1 to read the resource collection segment.
Unexpected mismatch of meta resources. Read %1, expected: %2.
BinaryContent
Cannot seek to %1 to read the operation data.
Cannot seek to %1 to read the resource collection block.
Cannot open meta resource %1.
QInstaller::Resource
Cannot open resource %1 for reading.
Read failed after %1 bytes: %2
Write failed after %1 bytes: %2
ResourceCollectionManager
Cannot open resource %1: %2
QInstaller::Component
Components cannot have children in updater mode.
Cannot open the requested UI file "%1": %2
Cannot load the requested UI file "%1": %2
Cannot open the requested license file "%1": %2
Error
Error: Operation %1 does not exist.
Cannot resolve isDefault in %1
Update Info:
There was an error loading the selected component. This component cannot be installed.
QInstaller::ComponentModel
Component is marked for installation.
Component is marked for uninstallation.
Component is installed.
Component is not installed.
Component Name
Action
Installed Version
New Version
Release Date
Size
QInstaller::ComponentSelectionPage
Alt+A
Select default components
Def&ault
Select default components in the tree view.
Alt+R
Reset to already installed components
&Reset
Reset all components to their original selection state in the tree view.
Alt+S
Select all components
&Select All
Select all components in the tree view.
Alt+D
Deselect all components
&Deselect All
Deselect all components in the tree view.
&Browse QBSP files
Select a Qt Board Support Package file to install additional content that is not directly available from the online repositories.
Filter the enabled repository categories
This component will occupy approximately %1 on your hard disk drive.
Open File
Select Components
Please select the components you want to update.
Please select the components you want to install.
Please select the components you want to uninstall.
Select the components to install. Deselect installed components to uninstall them. Any components already installed will not be updated.
Mandatory components need to be updated first before you can select other components to update.
QInstaller::ComponentSelectionPagePrivate
Filter
Component Information
Error
QInstaller::ConsumeOutputOperation
<to be saved installer key name> <executable> [argument1] [argument2] [...]
Needed installer object in %1 operation is empty.
Cannot save the output of "%1" to an empty installer key value.
File "%1" does not exist or is not an executable binary.
Running "%1" resulted in a crash.
QInstaller::CopyDirectoryOperation
<source> <target> ["forceOverwrite"]
Invalid argument in %1: Third argument needs to be forceOverwrite, if specified.
Invalid argument in %1: Directory "%2" is invalid.
Cannot create directory "%1".
Failed to overwrite "%1".
Cannot copy file "%1" to "%2": %3
Cannot remove file "%1".
QInstaller::CopyFileTask
Invalid task item count.
Cannot open file "%1" for reading: %2
Cannot open file "%1" for writing: %2
Writing to file "%1" failed: %2
QInstaller::CreateDesktopEntryOperation
Cannot backup file "%1": %2
Failed to overwrite file "%1".
Cannot write desktop entry to "%1".
QInstaller::CreateLinkOperation
Cannot create link from "%1" to "%2".
Cannot remove link from "%1" to "%2".
QInstaller::CreateLocalRepositoryOperation
Cannot set permissions for file "%1".
Cannot remove file "%1": %2
Cannot create archive "%1": %2
Cannot move file "%1" to "%2": %3
Installer at "%1" needs to be an offline one.
Cannot create path "%1".
Cannot remove directory "%1".
Cannot open file "%1" for reading.
Cannot read file "%1": %2
Cannot open file "%1" for reading: %2
Cannot create target directory: "%1".
Unknown exception caught: %1.
Removing file "%1".
Cannot remove file "%1".
Cannot remove directory "%1": %2
QInstaller::CreateShortcutOperation
<target> <link location> [target arguments] ["workingDirectory=..."] ["iconPath=..."] ["iconId=..."] ["description=..."]
Cannot create directory "%1": %2
Failed to overwrite "%1": %2
Cannot create link "%1": %2
DirectoryGuard
Path "%1" exists but is not a directory.
Cannot create directory "%1".
QInstaller::DownloadArchivesJob
Canceled
Downloading hash signature failed.
%1 of %2
%1 downloaded.
%n day(s),
%n hour(s),
%n minute(s)
%n second(s)
- %1%2%3%4 remaining.
- unknown time remaining.
Archive:
Total:
Download Error
Hash verification while downloading failed. This is a temporary error, please retry.
Cannot verify Hash
Cannot download archive %1: %2
Cannot fetch archives: %1
Error while loading %2
Downloading archive "%1" for component %2.
Scheme %1 not supported (URL: %2).
Cannot find component for %1.
QInstaller::Downloader
Target file "%1" already exists but is not a file.
Cannot open file "%1" for writing: %2
%2 is a sentence describing the error
File "%1" not open for writing: %2
%2 is a sentence describing the error.
Writing to file "%1" failed: %2
%2 is a sentence describing the error.
Redirect loop detected for "%1".
Network error while downloading '%1': %2.
Unknown network error while downloading "%1".
%1 is a sentence describing the error
Network transfers canceled.
Pause and resume not supported by network transfers.
Invalid source URL "%1": %2
%2 is a sentence describing the error
AuthenticationRequiredException
%1 at %2
Proxy requires authentication.
QInstaller::ElevatedExecuteOperation
Cannot start detached: "%1"
Cannot start: "%1": %2
Program crashed: "%1"
Execution failed (Unexpected exit code: %1): "%2"
UpdateOperation
Cannot write to registry path %1.
Registry path %1 is not writable.
exactly %1
at least %1
not more than %1
%1 or %2
%1 to %2
Invalid arguments in %1: %n arguments given, %2 arguments expected.
Invalid arguments in %1: %n arguments given, %2 arguments expected in the form: %3.
Renaming file "%1" to "%2" failed: %3
QInstaller::ExtractArchiveOperation
Extracting "%1"
QInstaller::ExtractArchiveOperation::Worker
Could not create handler object for archive "%1": "%2".
Cannot open archive "%1" for reading: %2
Error while reading contents of archive "%1": %2
Cannot prepare for file "%1"
Extract for archive "%1" canceled.
Error while extracting archive "%1": %2
QInstaller::FakeStopProcessForUpdateOperation
Cannot get package manager core.
This process should be stopped before continuing: %1
These processes should be stopped before continuing: %1
QInstaller::GlobalSettingsOperation
Settings are not writable.
Failed to write settings.
InstallerCalculator
Components added as automatic dependencies:
Components added as dependency for "%1":
Components that have resolved dependencies:
Selected components without dependencies:
Recursion detected, component "%1" already added with reason: "%2"
Cannot find missing dependency "%1" for "%2".
QInstaller::InstallIconsOperation
<source path> [vendor prefix]
Invalid Argument: source directory must not be empty.
Cannot prepare to backup file "%1": %2
Cannot backup file "%1": %2
Failed to overwrite "%1": %2
Failed to copy file "%1": %2
Cannot create directory "%1": %2
Lib7z
Internal code: %1
Not enough memory
Error: %1
Cannot retrieve property %1 for item %2.
Property %1 for item %2 not of type VT_FILETIME but %3.
Cannot convert UTC file time to system time.
Cannot load codecs.
Cannot open archive "%1".
Cannot retrieve number of items in archive.
Cannot retrieve path of archive item "%1".
Unknown exception caught (%1).
Cannot create temporary file: %1
Unsupported archive type.
Cannot create archive "%1"
Cannot create archive "%1": %2
Cannot remove old archive "%1": %2
Cannot rename temporary archive "%1" to "%2": %3
Unknown exception caught (%1)
ExtractCallbackImpl
Cannot retrieve path of archive item %1.
Cannot remove already existing symlink %1.
Cannot open file "%1" for writing: %2
Cannot create symlink at "%1". Another one is already existing.
Cannot read symlink target from file "%1".
Cannot create symlink at %1: %2
QInstaller::LicenseOperation
No license files found to copy.
Needed installer object in %1 operation is empty.
Can not write license file "%1".
No license files found to delete.
QInstaller::LineReplaceOperation
Invalid argument in %1: Empty search argument is not supported.
Cannot open file "%1" for reading: %2
Cannot open file "%1" for writing: %2
QInstaller::MetadataJob
Missing package manager core engine.
Preparing meta information download...
Unpacking compressed repositories. This may take a while...
Metadata download canceled.
Unknown exception during extracting.
Missing proxy credentials.
Authentication failed.
Unknown exception during download.
Failure to fetch repositories.
Extracting meta information...
Checksum mismatch detected for "%1".
Retrieving meta information from remote repository... %1/%2
Retrieving meta information from remote repository...
Cannot open file "%1" for reading: %2
Error while extracting archive "%1": %2
QInstaller::FileTaskObserver
%1 of %2
%1 received.
(%1/sec)
%n day(s),
%n hour(s),
%n minute(s)
%n second(s)
- %1%2%3%4 remaining.
- unknown time remaining.
QInstaller::PackageManagerCore
Error writing Maintenance Tool
Downloading packages...
Installation canceled by user.
All downloads finished.
Canceling the Installer
Authentication Error
Some components could not be removed completely because administrative rights could not be acquired: %1.
Unknown error.
Some components could not be removed completely because an unknown error happened.
User input is required but the output device is not associated with a terminal.
Error
The directory you selected already exists and contains an installation. Choose a different target for installation.
Warning
You have selected an existing, non-empty directory for installation.
Note that it will be completely wiped on uninstallation of this application.
It is not advisable to install into this directory as installation might fail.
Do you want to continue?
You have selected an existing file or symlink, please choose a different target for installation.
The installation path cannot be empty, please specify a valid directory.
The installation path cannot be relative, please specify an absolute path.
The path or installation directory contains non ASCII characters. This is currently not supported! Please choose a different path or installation directory.
As the install directory is completely deleted, installing in %1 is forbidden.
The path you have entered is too long, please make sure to specify a valid path.
The path you have entered is not valid, please make sure to specify a valid target.
The path you have entered is not valid, please make sure to specify a valid drive.
The installation path must not end with '.', please specify a valid directory.
The installation path must not contain "%1", please specify a valid directory.
Application not running in Package Manager mode.
No installed packages found.
Cannot register component! Component with identifier %1 already exists.
Application running in Uninstaller mode.
There is an important update available, please run the updater first.
Cannot resolve all dependencies.
Components about to be removed.
Cannot install %1. Component not found.
Cannot install component %1. Component is installed only as automatic dependency to %2.
Cannot install component %1. Component is not checkable, meaning you have to select one of the subcomponents.
Component %1 already installed
Cannot install %1. Component is a descendant of a virtual component %2.
Cannot install %1. Component is virtual.
Running processes found.
Cannot elevate access rights while running from command line. Please restart the application as administrator.
Error while elevating access rights.
Not enough disk space to store temporary files and the installation. %1 are available, while the minimum required is %2.
Not enough disk space to store all selected components! %1 are available, while the minimum required is %2.
Not enough disk space to store temporary files! %1 are available, while the minimum required is %2.
The volume you selected for installation seems to have sufficient space for installation, but there will be less than 1% of the volume's space available afterwards.
The volume you selected for installation seems to have sufficient space for installation, but there will be less than 100 MB available afterwards.
The estimated installer size %1 would exceed the supported executable size limit of %2. The application may not be able to run.
Installation will use %1 of disk space.
Invalid
QInstaller::PackageManagerCorePrivate
Unresolved dependencies
Error
Access error
Format error
Cannot write installer configuration to %1: %2
Stop Processes
These processes should be stopped to continue:
%1
Installation canceled by user
Retry count exceeded
Writing maintenance tool.
Failed to seek in file %1: %2
Maintenance tool is not a bundle
Cannot remove data file "%1": %2
Cannot write maintenance tool data to %1: %2
Cannot write maintenance tool to "%1": %2
Cannot remove temporary data file "%1": %2
Cannot write maintenance tool binary data to %1: %2
Writing offline base binary.
Cannot remove file "%1": %2
Cannot create directory "%1".
Cannot write offline binary to "%1": %2
Cannot remove temporary file "%1": %2
Variable 'TargetDir' not set.
Preparing the installation...
It is not possible to install from network location
Creating local repository
Creating Maintenance Tool
Installation finished!
Installation aborted!
It is not possible to run that operation from a network location
Removing deselected components...
Update finished!
Update aborted!
Removal completed successfully.
Removal aborted.
Cannot create target directory for installer.
Preparing offline generation...
Preparing installer configuration...
Creating the installer...
Failed to create offline installer. %1
Cannot remove temporary directory "%1".
Offline generation completed successfully.
Offline generation aborted!
Installing component %1
Installer Error
Error during installation process (%1):
%2
Done
Cannot prepare removal
Cannot start removal
Error during removal process:
%1
Unknown error
Cannot retrieve remote tree %1.
Failure to read packages from %1.
Cannot retrieve meta information: %1
Cannot add temporary update source information.
Cannot find any update source information.
Dependency cycle between components "%1" and "%2" detected.
QInstaller::PackageManagerGui
%1 Setup
Maintain %1
Do you want to cancel the installation process?
Do you want to cancel the removal process?
Do you want to quit the installer application?
Do you want to quit the uninstaller application?
Do you want to quit the maintenance application?
%1 Question
Settings
Specify proxy settings and configure repositories for add-on components.
Error
It is not possible to install from network location.
Please copy the installer to a local drive
QInstaller::IntroductionPage
Setup - %1
Welcome to the %1 Setup Wizard.
&Add or remove components
&Update components
&Remove all components
Retrieving information from remote installation sources...
At least one valid and enabled repository required for this action to succeed.
No updates available.
Only local package management available.
There is an important update available. Please select '%1' first
&Quit
QInstaller::LicenseAgreementPage
License Agreement
Alt+A
Agree license
Please read the following license agreement. You must accept the terms contained in this agreement before continuing with the installation.
I accept the license.
Please read the following license agreements. You must accept the terms contained in these agreements before continuing with the installation.
I accept the licenses.
QInstaller::TargetDirectoryPage
Installation Folder
Please specify the directory where %1 will be installed.
Alt+R
Browse file system to choose a file
B&rowse...
Browse file system to choose the installation directory.
Select Installation Folder
QInstaller::StartMenuDirectoryPage
Start Menu shortcuts
Select the Start Menu in which you would like to create the program's shortcuts. You can also enter a name to create a new directory.
QInstaller::ReadyForInstallationPage
U&ninstall
Ready to Uninstall
Setup is now ready to begin removing %1 from your computer.<br><font color="red">The program directory %2 will be deleted completely</font>, including all content in that directory!
U&pdate
Ready to Update Packages
Setup is now ready to begin updating your installation.
&Install
Ready to Install
Setup is now ready to begin installing %1 on your computer.
Ready to Update
QInstaller::PerformInstallationPage
U&ninstall
Uninstalling %1
&Update
Updating components of %1
&Install
Installing %1
Installing
Updating
Uninstalling
QInstaller::FinishedPage
Completing the %1 Wizard
Finished
Click %1 to exit the %2 Wizard.
Restart
Run %1 now.
The %1 Wizard failed.
QInstaller::RestartPage
Completing the %1 Setup Wizard
QInstaller::PerformInstallationForm
&Show Details
&Hide Details
QInstaller::RegisterFileTypeOperation
Registering file types is only supported on Windows.
Register File Type: Invalid arguments
RemoteClient
Cannot get authorization.
Cannot get authorization that is needed for continuing the installation.
Please start the setup program as a user with the appropriate rights,
or accept the elevation of access rights if being asked.
Cannot get authorization that is needed for continuing the installation.
Either abort the installation or use the fallback solution by running
%1
as a user with the appropriate rights and then clicking OK.
QInstaller::RemoteObject
Cannot read all data after sending command: %1. Bytes expected: %2, Bytes received: %3. Error: %4
QInstaller::ReplaceOperation
Current search argument calling "%1" with empty search argument is not supported.
Current mode argument calling "%1" with arguments "%2" is not supported. Please use string or regex.
Cannot open file "%1" for reading: %2
Cannot open file "%1" for writing: %2
QInstaller::QFileDialogProxy
User input is required but the output device is not associated with a terminal.
QInstaller::ScriptEngine
Cannot open script file at %1: %2
Exception while loading the component script "%1": %2
Unknown error.
on line number:
QInstaller::SelfRestartOperation
Installer object needed in operation %1 is empty.
Self Restart: Only valid within updater or package manager mode.
Self Restart: Invalid arguments
Settings
Cannot open settings file %1 for reading: %2
Select Categories
QInstaller::SettingsOperation
Missing argument(s) "%1" calling %2 with arguments "%3".
Current method argument calling "%1" with arguments "%2" is not supported. Please use set, remove, add_array_value, or remove_array_value.
QInstaller::SimpleMoveFileOperation
None of the arguments can be empty: source "%1", target "%2".
Cannot move file from "%1" to "%2", because the target path exists and is not removable.
Cannot move file "%1" to "%2": %3
Moving file "%1" to "%2".
QInstaller::TestRepository
Missing package manager core engine.
Empty repository URL.
Download canceled.
Timeout while testing repository "%1".
Cannot parse Updates.xml: %1
Cannot open Updates.xml for reading: %1
Authentication failed.
Unknown error while testing repository "%1".
KDUpdater::FileDownloader
Download finished.
Cryptographic hashes do not match.
Download canceled.
%1 of %2
%1 downloaded.
(%1/sec)
%n day(s),
%n hour(s),
%n minute(s)
%n second(s)
- %1%2%3%4 remaining.
- unknown time remaining.
KDUpdater::LocalFileDownloader
Cannot open file "%1" for reading: %2
Cannot open file "%1" for writing: %2
Writing to file "%1" failed: %2
KDUpdater::ResourceFileDownloader
Cannot read resource file "%1": %2
KDUpdater::HttpDownloader
Cannot download %1. Writing to file "%2" failed: %3
Cannot download %1. Cannot create file "%2": %3
%1 at %2
Authentication request canceled.
Secure Connection Failed
There was an error during connection to: %1.
This could be a problem with the server's configuration, or it could be someone trying to impersonate the server.
If you have connected to this server successfully in the past or trust this server, the error may be temporary and you can try again.
Try again
Job
Canceled
LocalPackageHub
%1 contains invalid content: %2
The file %1 does not exist.
Cannot open %1.
Parse error in %1 at %2, %3: %4
Root element %1 unexpected, should be 'Packages'.
LockFile
Cannot create lock file "%1": %2
Cannot write PID to lock file "%1": %2
Cannot obtain the lock for file "%1": %2
Cannot release the lock for file "%1": %2
KDUpdater::Task
%1 started
%1 cannot be stopped
Cannot stop task %1
%1 cannot be paused
Cannot pause task %1
Cannot resume task %1
%1 done
KDUpdater::UpdateFinder
Cannot access the package information of this application.
No package sources set for this application.
%n update(s) found.
Downloading Updates.xml from update sources.
Cannot download package source %1 from "%2".
Updates.xml file(s) downloaded from update sources.
Computing applicable updates.
Application updates computed.
KDUpdater::CopyOperation
Cannot backup file "%1".
Cannot copy a non-existent file: %1
Cannot remove file "%1": %2
Cannot copy file "%1" to "%2": %3
Cannot delete file "%1": %2
Cannot restore backup file into "%1": %2
KDUpdater::MoveOperation
Cannot backup file "%1".
Cannot remove file "%1": %2
Cannot copy file "%1" to "%2": %3
Cannot remove file "%1".
Cannot restore backup file for "%1": %2
KDUpdater::DeleteOperation
Cannot create backup of file "%1": %2
Cannot restore backup file for "%1": %2
KDUpdater::MkdirOperation
Cannot create directory "%1": %2
Unknown error.
Cannot remove directory "%1": %2
KDUpdater::RmdirOperation
Cannot remove directory "%1": %2
The directory does not exist.
Cannot recreate directory "%1": %2
KDUpdater::AppendFileOperation
Cannot backup file "%1": %2
Cannot open file "%1" for writing: %2
Cannot find backup file for "%1".
Cannot restore backup file for "%1".
Cannot restore backup file for "%1": %2
KDUpdater::PrependFileOperation
Cannot backup file "%1": %2
Cannot open file "%1" for reading: %2
Cannot open file "%1" for writing: %2
Cannot find backup file for "%1".
Cannot restore backup file for "%1".
Cannot restore backup file for "%1": %2
KDUpdater::UpdatesInfoData
Updates.xml contains invalid content: %1
Cannot read "%1"
Parse error in %1 at %2, %3: %4
Root element %1 unexpected, should be "Updates".
ApplicationName element is missing.
ApplicationVersion element is missing.
PackageUpdate element without Name
PackageUpdate element without Version
PackageUpdate element without ReleaseDate
InstallerBase
Unable to start installer