QQuickPlatformDialog Dialog is an abstract base class إنّ Dialog صنف أساسيّ مجرّد Cannot create an instance of StandardButton لا يمكن إنشاء سيرورة من StandardButton QtQuickControls2MaterialStylePlugin Material is an attached property إنّ Material صفة مرفقة QtQuickControls2UniversalStylePlugin Universal is an attached property إنّ Universal صفة مرفقة CopyAction Copy CutAction Cut DeleteAction Delete PasteAction Paste RedoAction Redo SelectAllAction Select All UndoAction Undo ColorDialog Eyedropper Hue Alpha Color ColorInputs Hex RGB HSV HSL FileDialog Overwrite file? “%1” already exists. Do you want to replace it? File name Filter Up Add Favorite Remove FontDialog Writing System MessageDialog Hide Details... Show Details... SideBar Add Favorite FontDialogContent Family Font family Style Font style Size Font point size Effects Underline Strikeout Sample QQmlDebugServerImpl QML Debugger: Invalid argument "%1" detected. Ignoring the same. QML Debugger: Ignoring "-qmljsdebugger=%1". The format is "-qmljsdebugger=[file:<file>|port:<port_from>][,<port_to>][,host:<ip address>][,block][,services:<service>][,<service>]*" "file:" can be used to specify the name of a file the debugger will try to connect to using a QLocalSocket. If "file:" is given any "host:" and"port:" arguments will be ignored. "host:" and "port:" can be used to specify an address and a single port or a range of ports the debugger will try to bind to with a QTcpServer. "block" makes the debugger and some services wait for clients to be connected and ready before the first QML engine starts. "services:" can be used to specify which debug services the debugger should load. Some debug services interact badly with others. The V4 debugger should not be loaded when using the QML profiler as it will force any V4 engines to use the JavaScript interpreter rather than the JIT. The following debug services are available by default: The QML debugger The V4 debugger The QML inspector The QML profiler Allows the client to delay the starting and stopping of QML engines until other services are ready. QtCreator uses this service with the QML profiler in order to profile multiple QML engines at the same time. Sends qDebug() and similar messages over the QML debug connection. QtCreator uses this for showing debug messages in the debugger console. helps to see if a translated text will result in an elided text in QML elements. Other services offered by qmltooling plugins that implement QQmlDebugServiceFactory and which can be found in the standard plugin paths will also be available and can be specified. If no "services" argument is given, all services found this way, including the default ones, are loaded. QQmlCodeGenerator Duplicate method name Method names cannot begin with an upper case letter Illegal method name Property value set multiple times Expected type name Scoped enum names must begin with an upper case letter Enum names must begin with an upper case letter Enum value must be an integer Enum value out of range Signal names cannot begin with an upper case letter Illegal signal name Illegal property name Invalid component id specification No property alias location Invalid alias reference. An alias reference must be specified as <id>, <id>.<property> or <id>.<value property>.<property> Invalid alias location Invalid empty ID IDs cannot start with an uppercase letter IDs must start with a letter or underscore IDs must contain only letters, numbers, and underscores ID illegally masks global JavaScript property Invalid use of id property Object Duplicate scoped enum name Duplicate signal name Duplicate property name Property duplicates alias name Property names cannot begin with an upper case letter Duplicate default property Duplicate alias name Alias has same name as existing property Alias names cannot begin with an upper case letter Property value set multiple times QQmlParser Unexpected object definition Invalid import qualifier '%1': must start with an uppercase letter Reserved name "Qt" cannot be used as an qualifier Script import qualifiers must be unique. Script import requires a qualifier Multiple %1 pragmas found Unknown %1 '%2' in pragma Unknown pragma '%1' Empty pragma found Expected parameter type Invalid signal parameter type: Invalid property type modifier Function declaration inside grouped property JavaScript declaration outside Script element Illegal unicode escape sequence Unexpected token '.' Stray newline in string literal End of file reached at escape sequence Illegal hexadecimal escape sequence Octal escape sequences are not allowed Unclosed string at end of line There can be at most one numeric separator between digits A trailing numeric separator is not allowed in numeric literals At least one hexadecimal digit is required after '0%1' At least one octal digit is required after '0%1' At least one binary digit is required after '0%1' Decimal numbers can't start with '0' Illegal syntax for exponential number Invalid regular expression flag '%0' Unterminated regular expression backslash sequence Unterminated regular expression class Unterminated regular expression literal Syntax error Imported file must be a script Invalid module URI Incomplete version number (dot but no minor) File import requires a qualifier Module import requires a qualifier Invalid import qualifier QQmlComponent Invalid empty URL createObject: value is not an object Maximum call stack size exceeded. Object or context destroyed during incubation QQmlComponentAndAliasResolverBase Cannot wrap implicit component Cannot mark object as component Component objects cannot declare new functions. Component objects cannot declare new properties. Component objects cannot declare new signals. Cannot create empty component specification Component elements may not contain properties other than id Invalid component body specification id is not unique Cyclic alias Invalid alias reference. Unable to find id "%1" Invalid alias target location: %1 QQmlEngine There are still "%1" items in the process of being created at engine destruction. executeSql called outside transaction() Read-only Transaction Version mismatch: expected %1, found %2 SQL transaction failed transaction: missing callback SQL: can't create database, offline storage is disabled. LocalStorage: can't create path %1 SQL: database version mismatch SQL: Cannot open database QQmlImports module "%1" version %2.%3 is not installed module "%1" is not installed "%1" is ambiguous. Found in %2 and in %3 - %1 is neither a type nor a namespace - %1 is not a namespace - %1 is not a type - nested namespaces not allowed local directory is ambiguous. Found in %1 and in %2 is ambiguous. Found in %1 in version %2.%3 and %4.%5 is instantiated recursively is not a type module does not support the designer "%1" "%1" version %2.%3 is defined more than once in module "%4" "%1" is not a valid import URL. You can pass relative paths or URLs with schema, but not absolute paths or resource paths. Try "%2". "%1": no such directory import "%1" has no qmldir and no namespace Cannot resolve URL for import "%1" Found plugin with old IID, this will be unsupported in upcoming Qt releases: qml static plugin with name "%2" has no metadata URI could not resolve all plugins for module "%1" module "%1" plugin "%2" not found module "%1" version %2.%3 cannot be imported because: %4 module "%1" cannot be imported because: %2 QQmlTypeLoader Cannot update qmldir content for '%1' File was compiled ahead of time with an incompatible version of Qt and the original file cannot be found. Please recompile No such file or directory Script %1 unavailable Type %1 has no inline component type called %2 Type %1 unavailable No matching type found, pragma Singleton files cannot be used by QQmlComponent. pragma Singleton used with a non composite singleton type %1 qmldir defines type as singleton, but no pragma Singleton found in type %1. File is empty Cached QML Unit has no objects module "%1" is not installed Namespace %1 cannot be used as a type Unreported error adding script import to import database %1 %2 qmlRegisterType Invalid QML %1 name "%2"; type names must begin with an uppercase letter Invalid QML %1 name "%2"; value type names should begin with a lowercase letter Invalid QML %1 name "%2" Cannot install %1 '%2' into protected module '%3' version '%4' QQmlObjectCreator Cannot instantiate bound inline component in different file Cannot instantiate bound component outside its creation context Cannot assign value %1 to property %2 Cannot set properties on %1 as it is null Using grouped property syntax on %1 which has no properties Cannot assign an object to signal property %1 Cannot assign object type %1 with no default method Cannot connect mismatched signal/slot %1 vs %2 Cannot assign object to interface property Cannot assign object to read only list Cannot construct value type from given object Cannot assign primitives to lists Unable to create object of type %1 Composite Singleton Type %1 is not creatable QQmlRewrite Signal has an excessive number of parameters: %1 Signal uses unnamed parameter followed by named parameter. Signal parameter "%1" hides global variable. QQmlPropertyCacheCreatorBase Nothing to override. Remove "override" keyword Cannot override FINAL property Cannot override non virtual property. Add "virtual" to the property of the base object unknown Invalid signal parameter type: %1 Duplicate signal name: invalid override of property change signal or superclass signal Duplicate method name: invalid override of property change signal or superclass signal Type cannot be used for 'on' assignment Fully dynamic types cannot declare new properties. Fully dynamic types cannot declare new signals. Fully Dynamic types cannot declare new functions. Type '%1' cannot declare new members. Non-existent attached object Cyclic alias Invalid alias target QQmlPropertyValidator Property assignment expected "%1.%2" is not available in %3 %4.%5. "%1.%2" is not available due to component versioning. Cannot assign a value directly to a grouped property Invalid use of namespace Invalid attached object assignment %1 properties cannot be used here Invalid property assignment: "%1" is a read-only property Cannot assign multiple values to a script property Cannot assign multiple values to a singular property Property has already been assigned a value Invalid grouped property access Invalid grouped property access: Property "%1" with primitive type "%2". Invalid grouped property access: Property "%1" with type "%2", which is neither a value nor an object type Unsupported grouped property access: Property "%1" with type "%2" has a dynamic meta-object. Cannot assign to non-existent default property Cannot assign to non-existent property "%1" Invalid use of id property with a value type Cannot assign primitives to lists Invalid property assignment: unknown enumeration Invalid property assignment: string expected Invalid property assignment: string or string list expected Invalid property assignment: byte array expected Invalid property assignment: url expected Invalid property assignment: unsigned int expected Invalid property assignment: int expected Invalid property assignment: number expected Invalid property assignment: color expected Invalid property assignment: date expected Invalid property assignment: time expected Invalid property assignment: datetime expected Invalid property assignment: point expected Invalid property assignment: size expected Invalid property assignment: rect expected Invalid property assignment: boolean expected Invalid property assignment: %1 expected Invalid property assignment: regular expression expected; use /pattern/ syntax Invalid property assignment: number or array of numbers expected Invalid property assignment: int or array of ints expected Invalid property assignment: bool or array of bools expected Invalid property assignment: url or array of urls expected Invalid property assignment: string or array of strings expected Invalid property assignment: unsupported type "%1" "%1" cannot operate on "%2" Cannot assign object of type "%1" to list property "%2"; expected "%3" Cannot assign value of type "%1" to property "%2", expecting "%3" Invalid property assignment: script expected Cannot assign object of type "%1" to property of type "%2" as the former is neither the same as the latter nor a sub-class of it. Cannot assign to property of unknown type "%1". SignalHandlerResolver Non-existent attached object Signal uses unnamed parameter followed by named parameter. Signal parameter "%1" hides global variable. "%1.%2" is not available in %3 %4.%5. "%1.%2" is not available due to component versioning. Cannot assign a value to a signal (expecting a script to be run) Incorrectly specified signal assignment QQmlEnumTypeResolver Invalid property assignment: "%1" is a read-only property QQmlDeferredAndCustomParserBindingScanner You cannot define both DeferredPropertyNames and ImmediatePropertyNames on the same type. You cannot assign an id to an object assigned to a deferred property. Cannot assign to non-existent property "%1" QQmlTypeData Composite Singleton Type %1 is not creatable. Element is not creatable. QQmlJSTypeDescriptionReader Could not parse document. Expected a single import. Expected import of QtQuick.tooling. Import statement without version. Major version different from 1 not supported. Expected document to contain a single object definition. Expected document to contain a Module {} member. Expected dependency definitions Expected only Property, Method, Signal and Enum object definitions, not "%1". Unknown access semantics "%1". Expected only lineNumber, name, prototype, defaultProperty, attachedType, valueType, exports, interfaces, isSingleton, isCreatable, isStructured, isComposite, hasCustomParser, enforcesScopedEnums, aliases, exportMetaObjectRevisions, deferredNames, and immediateNames in script bindings, not "%1". Expected only script bindings and object definitions. Component definition is missing a name binding. Expected only Parameter in object definitions. Expected only name, lineNumber, type, revision, isPointer, isTypeConstant, isList, isCloned, isConstructor, isMethodConstant, and isJavaScriptFunction in script bindings. Method or signal is missing a name script binding. Expected script binding. Expected only type, name, lineNumber, revision, isPointer, isTypeConstant, isReadonly, isRequired, isFinal, isList, bindable, read, write, isPropertyConstant, reset, notify, index, privateClass and script bindings. Property object is missing a name script binding. Expected only name, alias, isFlag, values, isScoped, type, or lineNumber. Expected only name, type, isPointer, isTypeConstant, isReadonly, or IsList script bindings. Expected string after colon. Expected boolean after colon. Expected true or false after colon. Expected numeric literal after colon. Expected integer after colon. Expected array of strings after colon. Expected array literal with only string literal members. Expected string literal to contain 'Package/Name major.minor' or 'Name major.minor'. Expected array of numbers after colon. Expected array literal with only number literal members. Meta object revision without matching export. Expected integer. Meta object revision and export version differ. Revision %1 corresponds to version %2.%3; it should be %4.%5. Expected object literal after colon. Expected expression after colon. Expected strings as enum keys. Expected either array or object literal as enum definition. QQmlProfilerQtdWriter Could not open %1 for writing Could not open stdout for writing No data to save QQmlDomAstCreator id is a special attribute, that should not be used as property name id attributes should only be a lower case letter followed by letters, numbers or underscore, assuming they refer to an id property id attributes should have only simple strings as values Maximum statement or expression depth exceeded in QmlDomAstCreator CommentInfo Unexpected comment start %1 Non whitespace char %1 after comment end at %2 ErrorGroup Invalid module name in import %1 Invalid Version %1 Field expressions should start with a dot, even when at the start of the path %1. Error extracting integer from '%1' at char %2. Unclosed quoted string at char %1. Expected a brace in filter after the question mark (at char %1). Expected a closing brace in filter after the question mark (at char %1). Filter from string not yet implemented. Unexpected character '%1' after square bracket at %2. square braces misses closing brace at char %1. Index should use square brackets and not a dot (at char %1). Unexpected character '%1' after dot (at char %2). Unexpected character '%1' after end of component (char %2). unclosed square brace at end. Import Version %1 in import string '%2' overridden by explicit version %3 namespace %1 in import string '%2' overridden by explicit importId %3 Unexpected URI format in import '%1' QmlObject Repeated PropertyDefinition with name %1 Repeated binding with name %1 Repeated Method with name %1 Export Expected string literal to contain 'Package/Name major.minor' or 'Name major.minor' not '%1'. ScriptExpression Parsing of code failed ImportScope Looking up '%1' expected a list of exports, not %2 Expected Export looking up '%1', not %2 ErrorMessage Double registration of error %1: (%2) vs (%3) QmldirFile QmldirFile started from invalid path '%1' canonicalFilePath is empty FileWriter Could not create temp file for %1 Rename of file %1 to %2 failed Error while writing Exception trying to write file %1 DomItem Root context %1 is not known Circular reference: Resolve with path ending with empty path, matches nothing. After an empty path only key, field or indexes are supported, not %1. Root path is supported only at the beginning, and only once, found %1 at %2 in %3 Javascript lookups not yet implemented Premature end of path, expected a field specifying the type, and a key specifying the name to search after a lookup directive in %2 Expected a key path specifying the type to search after a lookup directive, not %1 at component %2 of %3 Type for lookup was expected to be one of '%1', not %2 Expected a key specifying the path to search after the @lookup directive and type, not %1 at component %2 of %3 Path with empty lookup at component %1 of %2 will match nothing in %3. Prototype chain called outside object Detected multiple visit of %1 visiting prototypes of %2 Called visitScopeChain outside scopes Unexpected non scope object %1 (%2) reached in visitScopeChain QQmlJS::Dom could not resolve prototype %1 (%2) Multiple definitions found, using first only, resolving prototype %1 (%2): %3 Unexpected prototype type %1 (%2) CppTypeInfo Unexpected complex CppType %1 Unexpected complex CppType %1 (map with non QString key) ModuleIndex Module %1 (unversioned) has versioned entries for '%2' from %3 Module %1 (major version %2) has versioned and unversioned entries for '%3' Failed to find main qmldir file for %1 %2 in %3. Dom::fileTypeForPath Could not detect type of file %1 DomUniverse Ignoring request to load file %1 of unexpected type %2, calling callback immediately Non existing path %1 Error opening path %1: %2 %3 LoadInfo advanceLoad called but found no work, which should never happen advanceLoad called after work should have been done, which should never happen Uninitialized LoadInfo %1 Ignoring dependencies for empty (invalid) type %1 dependencies of %1 (%2) not yet implemented DomEnvironment Non existing path to load: '%1' Unexpected file to load: '%1' missing load info in Failed to find main qmldir file for %1 %2 in %3. Missing loadInfo for %1 Could not find the QML/plugins.qmltypes file A mutable module was requested in a multithreaded environment Could not get path for newly created ModuleIndex %1 %2 Unexpected path not ending with qmldir in qmldirFilePaths: %1 addLoadinfo replaces unfinished load info for %1 TypeDescriptionReader Property object is missing a name or type script binding. Method or signal is missing a name. negative meta revision %1 not supported Component definition is missing a name binding. QQmlConnections Cannot assign to non-existent property "%1" Connections: nested objects not allowed Connections: syntax error Connections: script expected Implicitly defined onFoo properties in Connections are deprecated. Use this syntax instead: function onFoo(<arguments>) { ... } Detected function "%1" in Connections element. This is probably intended to be a signal handler but no signal of the target matches the name. QQmlDelegateModelGroup Group names must start with a lower case letter get: index out of range insert: index out of range create: index out of range resolve: from index out of range resolve: from index invalid resolve: to index out of range resolve: to index invalid resolve: from is not an unresolved item resolve: to is not a model item remove: invalid index remove: index out of range remove: invalid count addGroups: index out of range addGroups: invalid count removeGroups: index out of range removeGroups: invalid count setGroups: index out of range setGroups: invalid count move: invalid from index move: invalid to index move: invalid count move: from index out of range move: to index out of range QQmlDelegateModel The delegate of a DelegateModel cannot be changed within onUpdated. The delegateModelAccess of a DelegateModel cannot be changed within onUpdated. The maximum number of supported DelegateModelGroups is 8 The group of a DelegateModel cannot be changed within onChanged The delegates of a DelegateModel cannot be changed within onUpdated. QQmlPartsModel The group of a DelegateModel cannot be changed within onChanged Delegate component must be Package type. QQmlListModel unable to enable dynamic roles as this model is not empty unable to enable static roles as this model is not empty dynamic role setting must be made from the main thread, before any worker scripts are created remove: indices [%1 - %2] out of range [0 - %3] remove: incorrect number of arguments insert: index %1 out of range insert: value is not an object move: out of range append: value is not an object set: value is not an object set: index %1 out of range ListElement: cannot contain nested elements ListElement: cannot use reserved "id" property ListElement: cannot use script for property value ListModel: undefined property '%1' QQmlObjectModel insert: index %1 out of range move: out of range remove: indices [%1 - %2] out of range [0 - %3] QQmlXmlListModelRole An XML element must not start with '/' An XML element must not end with '/' An XML element must not contain "//" XmlListModelRoleList An XmlListModel query must start with '/' QQmlXmlListModel "%1" duplicates a previous role name and will be disabled. Failed to create an instance of QRunnable query object Query error: "%1" QQuickAnchors Possible anchor loop detected on fill. Possible anchor loop detected on centerIn. Cannot anchor to an item that isn't a parent or sibling. Possible anchor loop detected on vertical anchor. Possible anchor loop detected on horizontal anchor. Cannot specify left, right, and horizontalCenter anchors at the same time. Cannot anchor to a null item. Cannot anchor a horizontal edge to a vertical edge. Cannot anchor item to self. Cannot specify top, bottom, and verticalCenter anchors at the same time. Baseline anchor cannot be used in conjunction with top, bottom, or verticalCenter anchors. Cannot anchor a vertical edge to a horizontal edge. QQuickFlipable front is a write-once property back is a write-once property QQuickLayoutMirroringAttached LayoutMirroring attached property only works with Items and Windows QQuickEnterKeyAttached EnterKey attached property only works with Items QQuickParentAnimation Unable to preserve appearance under complex transform Unable to preserve appearance under non-uniform scale Unable to preserve appearance under scale of 0 QQuickAnchorAnimation Cannot set a duration of < 0 QQuickPathAnimation Cannot set a duration of < 0 QQuickItemView Delegate must be of Item type QQuickLoader setSource: value is not an object QQuickPathView Delegate must be of Item type QQuickRepeater Delegate must be of Item type QQuickParentChange Unable to preserve appearance under complex transform Unable to preserve appearance under non-uniform scale Unable to preserve appearance under scale of 0 QQuickTextDocument Null document object: cannot load Failed to read: %1 %1 does not exist Cannot save: %1 Can only save to local files QQuickTextUtil %1 does not support loading non-visual cursor delegates. Could not load cursor delegate QQuickWindow Failed to initialize graphics backend for %1. QQuickAbstractAnimation Cannot animate non-existent property "%1" Cannot animate read-only property "%1" QQuickPauseAnimation Cannot set a duration of < 0 QQuickPropertyAnimation Cannot set a duration of < 0 QQuickBehavior Cannot change the animation assigned to a Behavior. QQuickPixmap Error decoding: %1: %2 Error decoding: %1 Invalid image provider: %1 Failed to get image from provider: %1 Failed to get texture from provider: %1 Cannot open: %1 QQuickPropertyChanges PropertyChanges does not support creating state-specific objects. Cannot assign to non-existent property "%1" Cannot assign to read-only property "%1"